AC Surge Protection Devices (SPDs) 455

Surge Stryker surge protection device with status lights and cables for electrical safety

ACT Communications AC Surge Protection Devices (SPDs) 455

ACT offers real-world solutions to all of these power quality problems.

The Full Featured Surge Stryker Family is a high performance surge protector designed for critical panel locations. The SPD incorporates high-energy MOVs with the best performing AC filter on the market to provide protection against transients originating from induced lightning strikes, utility switching and facility power noise.

Real-time diagnostics include LED fault indicators for each phase, as well as an optional alarm that includes red LED, dual Form C dry contacts for remote indication and an audible alarm, so you always know the Surge Stryker Protector is at full capacity.

The ACT 455 Family is available for all voltages and configurations up to 480Vac. Housed in a rugged NEMA 12 enclosure, these devices are suitable for harsh indoor or outdoor applications.

ACT Surge Stryker 455 Family

7-Mode Hardwired Primary AC Surge Protection Device

Surge Handling (Imax) Up to 30 kA/mode 6000 kA/phase

    Recommended Location
  • Type 2 Location
  • Cell Sites, Well Pumps / Cat C
  • Distribution Equipment / Cat B
  • Branch Panels / Cat B
  • Point of Use / Cat A
  • Residential / Cat C
Surge Stryker surge protection device with label and wires, by ACT Communications. For electrical safety and reliability.
  • Available in 050, 080, 100, 160, 200, 300 kA per modes
  • 7 modes of discrete protection (L-N, L-G, N-G)
  • 10 modes of protection (L-N, L-G, N-G, L-L)
  • 200 kAIC Fault Current Rating
  • Advanced EMI/RFI Noise Filtering (-45dB) 3kHz - 1MHz
  • 3rd Party Tested - 15,000 (C3 20 kV/10 kA)
  • Optional 30amp fuse allows direct connect to power bus
  • Response Time <5 nanoseconds MOV Technology
  • Green LED Indicators
  • Alarms Red LED (option)
  • EMI/RFI Noise Rejection (option) -45dB and -55dB
  • Surge Counter (option) 8-digit resettable transient counter
  • Remote Signaling Form C dry contacts – NC & NO
  • Audible (option) With Shut-off Switch

ACT Surge Stryker 455 CGC Family

7-Mode Hardwired Primary AC Surge Protection Device

Surge Handling (Imax) Up to 50 kA/mode 100 kA/phase

ACT Surge Stryker 455 CGX Family

7-Mode Hardwired Primary AC Surge Protection Device

Surge Handling (Imax) Up to 80 kA/mode 160 kA/phase

Resettable Surge Counter
ACT 455 Surge Stryker device with wiring for surge protection by ACT Communications, Athens AL, contact info visible.
  • 7 modes of discrete protection (L-N, L-G, N-G)
  • 10 modes of protection (L-N, L-G, N-G, L-L)
  • 200 kAIC Fault Current Rating
  • EMI/RFI Noise Filtering (-45dB) 3kHz - 1MHz
  • 3rd Party Tested - 15,000 (C3 20 kV/10 kA)
  • Response Time <5 nanoseconds MOV Technology
  • Green LED Indicators
  • EMI/RFI Noise Rejection -45dB
  • Alarms Red LED
  • Remote Signaling Form C dry contacts – NC & NO
  • Audible With Shut-off Switch
  • Enclosure Type: Painted Steel NEMA 12
  • Standard no option code
  • Stainless Steel – SS
  • Wire option: Standard 10awg 3’ pigtails
  • Alarms Alarm LED, Remote Relay & Audible
  • Filter -45 dB EMI / Noise Filter
  • Optional Mounting Top Feed – T

5 Year Standard Warranty

  • Capture the lightning strike to a known and preferred attachment point using a purpose-designed air terminal system.
  • Conduct the energy to the ground via a purpose-designed down conductor.
  • Dissipate the energy into a low-impedance grounding system.
  • Bond all ground points to eliminate ground loops and create an equipotential plane.
  • Protect equipment form surges and transients on incoming power lines to prevent equipment damage and costly operational downtime.
  • Protect equipment from surges and transients on incoming telecommunications and signal lines to prevent equipment damage and costly operational downtime.

Let's Build Your Uninterruptible Power Strategy.

Your facility's reliability is too critical to leave to chance. From initial design consultation to ongoing maintenance and emergency support, the SPS Sales team is your comprehensive local resource for all things related to critical power. Let us put our decades of experience in the Houston market to work for you.
Contact our Houston-based experts today to analyze your needs, audit your current infrastructure, or design a new system that guarantees performance and peace of mind.

Call Our Experts Directly: 281.443.2080

Request a Free Consultation or Quote